SWIM N SPA STAIN & SCALE: POOL PROTECT (1 QT.)
SWIM N SPA STAIN & SCALE: POOL PROTECT (1 QT.)
Swim N Spa Pool Protect eliminates water discoloration caused by mineral
and scale deposits in pool and spa water. Also helps filter remove
suspended particles that causes cloudiness.
DIRECTIONS FOR USE
To prevent staining, water discoloration and scale build-up, add
the following dosages to meet your needs:
Protect should be added directly to pool water. The normal
maintenance doses is 2 oz. per 10,000 gals. of water per week.
Your pool water should be tested every 4 to 5 weeks to ensure
that the proper level of Protect is maintained. Pools with heavy
mineral and scale may need higher levels.
FOR POOLS: Normal maintenance levels for this product are 10 -
12 ppm (parts per million) or 20 ppm for scale and stain removal.
It is important to monitor these levels in order to prevent staining in
new and older pools. This products levels are depleted as it does
its job. Your pool may require more or less product depending on
the amount of contaminants in your pool. Adding 11/2 oz. of this
product will raise the level 1 ppm in 10,000 gallons. Have a
sequest test performed.
Note: Spa Sauna Direct only ships pool and spa chemicals within the continental United States.