SWIM N SPA BALANCER: PH PLUS (5 LB)
SWIM N SPA BALANCER: PH PLUS (5 LB)
Swim N Spa pH Plus is used to raise the pH in pool and spa water. The water in
the pool or spa should be maintained at a pH of 7.2-7.6 and total
alkalinity from 80-140 ppm. Test water frequently with suitable test kit
to ensure proper pH is maintained. Swim N Spa pH Plus is compatible with all
sanitizers including bromine, chlorine and biguanide.
ACTIVE INGREDIENT:
Sodium Carbonate................................100%
SPA INSTRUCTIONS
This product should be used if pH is below 7.2.
1. Turn on air blower, jets or lter system.
2. Premix 1 oz. of this product with water in plastic pail and add
diluted product to spa.
3. Retest water after 30 minutes.
4. Follow steps 1-3 until pH and total alkalinity are in the range of
7.2-7.6 and 80-140 ppm respectively.
NOTE: Always wait 30 minutes between doses and test water before
each addition of this product.
POOL INSTRUCTIONS
Test for pH with a reliable test kit. If the pH is low (7.2 or below) add this
product according to the chart below. Pre-dissolve this product in a
plastic pail and slowly pour around the perimeter of the swimming pool
while the circulation system is operating. Allow system to operate for 1
hour after application. Retest the pH. If pH is still low, repeat this
process until the pH reaches 7.4-7.6.
BASE DEMAND |
GALLONS IN POOL | ||
5,000 | 10,000 | 20,000 | |
1 | 2.6 oz. | 5.1 oz. | 10.3 oz. |
2 | 5.1 oz | 10.3 oz | 1.3 lbs |
3 | 7.7 oz | 15.4 oz | 1.9 lbs |
4 | 10.3 oz | 1.3 lbs | 2.5 lbs |
5 | 12.8 oz | 1.5 lbs | 3.2 lbs |
6 | 15.4 oz | 1.9 lbs | 3.9 lbs |
7 | 1.1 lbs | 2.2 lbs | 4.5 lbs |
NOTE: PH PLUS CAN NOT BE SHIPPED TO CALIFORNIA!